Plasma Ignition Application Guide

Performance Class Amps Dual Channel Application Notes
X60 Street / Eco 212 No Most stock automotive applications - Performance, Fuel Economy
X40 Street / Eco 200 No Forced Induction Applications, Fixes spark blow out from high boost, Coil voltages > 40 kV
X80 MAX / Racing 420 / 212 Yes High revving (>6000rpm) V6s and V8s, Ultra lean applications
Waste Spark Street / Eco 212 Yes Dual (simultaneous) Fire applications, Performance, Fuel Economy

The X60 kits are meant for the majority of automotive applications - from racing, street performance, daily commuters to get maximum fuel economy, experimenters trying different fuel mixs - water injection, ethanol, methanol etc.

Twin Cylinder Ignition Kit 4-Cylinder Ignition Kit
Plasma Spark Generator Plasma Spark Generator
Wiring Schematic
 $339.99
Wiring Schematic
 $399.99

Boot Type

Boot Type
 
6-Cylinder Ignition Kit 8-Cylinder Ignition Kit
Plasma Spark Generator Plasma Spark Generator
Wiring Schematic
 $439.99
Wiring Schematic
 $499.99

Boot Type

Boot Type

The x40 kits are meant for speciality applications which run any combination high compression and/or forced induction etc., which require the primary ignition coil voltages to exceed 40kV. The X40U power modules include an additional 40kV of protection circuitry to work with the ultra high voltage discharge coils.

Twin Cylinder Ignition Kit 4-Cylinder Ignition Kit
Plasma Spark Generator Plasma Spark Generator
Wiring Schematic
 $459.99
Wiring Schematic
 $529.99

Boot Type

Boot Type
 
6-Cylinder Ignition Kit 8-Cylinder Ignition Kit
Plasma Spark Generator Plasma Spark Generator
Wiring Schematic
 $569.99
Wiring Schematic
 $619.99

Boot Type

Boot Type

The x80 kits represent uncompromising performance. It has two independent channels that can fire plasma independently, or when the outputs are combined or 'bussed' it can pump a whopping 400 amps of peak power impulse into an ordinary spark - useful if you're igniting water! For high revving race engines, channel 1 can be made to amplify the sparks for the odd firing order cylinders, and channel 2 for the even firing cylinders. This way, the peak power amperage of 200 amps is maintained even at the highest RPMs.

6-Cylinder Ignition Kit 8-Cylinder Ignition Kit
Plasma Spark Generator Plasma Spark Generator
Wiring Schematic
 $539.99
RPG Bypass Wiring Schematic
 $599.99

Boot Type

Boot Type

The x60 wastespark kits finally offer a simple way to convert an otherwise intractible ignition system - the wasted spark ignition coil pack, into a high energy plasma ignition system. It has two independent channels that fire plasma simultaneously in two cylinders, one firing a positive spark and one firing a negative spark. The kits include positive and negative ignition cables, which need to be installed carefully as mismatching them can cause the diode circuitry in the cables to fail. Please refer to the manual to determine the polarity of your existing cylinder wires as they are fired by the wastespark coil pack. Having a spark tester and some high voltages diodes is highly recommended.

2-Cylinder Waste Spark Ignition Kit 4-Cylinder Waste Spark Ignition Kit
Plasma Spark Generator Plasma Spark Generator
Wiring Schematic
 $539.99
RPG Bypass Wiring Schematic   RPG COP Wiring Schematic
 $599.99

Boot Type

Boot Type
 
6-Cylinder Waste Spark Ignition Kit 8-Cylinder Waste Spark Ignition Kit
Plasma Spark Generator Plasma Spark Generator

Radiant Plasma Spark Generator Specification

RPG Bypass Wiring Schematic
 $639.99

Plasma Distributor Specification

RPG Bypass Wiring Schematic
 $699.99

Boot Type

Boot Type

Purchase and Warranty terms

The product is guaranteed to be free from manufacturing defects for a period of 90 days after purchase. The warranty does not cover units damaged as a result of incorrect wiring / installation by the buyer and failure to follow proper installation instructions. The buyer assumes all responsibility and liability for proper and safe handling of goods. Furthermore, the user indemnifies www.aquapulser.com from all claims arising from the handling or use of the goods. It is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge and high voltage generated by the ignition coil and the sparkamp module. By purchasing the unit, the buyer agrees that the sole and exclusive maximum liability to www.aquapulser.com arising from any product sold on the website shall be the price of the product ordered. In no event shall www.aquapulser.com, its directors, officers, employees or other representatives be liable for special, indirect, consequential, or punitive damages related to the products sold. NO PARTY SHALL BE LIABLE TO ANY OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

block